Experience Digitally Assisted Learning at it's Best

MindLeaders Series on CCNA

Total Time: 53 hours

 

This series of courses is designed to help you prepare for the Cisco Certified Network Associate certification exam. Each of the 60 objectives on the CCNA exam will be covered, and the questions will be indicative of the types of questions on the exam.

This study guide and/or material is not sponsored by, endorsed by or affiliated with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA", CCNA", CCDP", CCNP", CCIE", CCSI". The Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. All other trademarks are trademarks of their respective owners.

CCNA: OSI Reference Model Time: 3 hours SCOC01

CCNA: OSI Reference Model describes the OSI reference model and uses it to explain types of networks and networking functions.

  • Introduction to Networking
  • The Upper OSI Layers
  • The Lower OSI Layers
  • Using a Layered Model


 

CCNA: Networks and Data Transfer Time: 3 hours SCOC02

CCNA: Networks and Data Transfer uses the OSI reference model to show how networks encapsulate data and transfer it throughout a network. This course also introduces routing as a method of data transfer.

  • Communication between Layers
  • Connection and Data Flow
  • The Data Link Layer
  • Network Addressing


 

CCNA: Local Area Networking Time: 3 hours SCOC03

CCNA: Local Area Networking describes the components and operation of Ethernets, Fast Ethernets, Token Ring and FDDI local area networks.

  • Introduction to LANs
  • Ethernet
  • Fast Ethernet
  • Token Ring and FDDI


 

CCNA: Wide Area Networking Time: 3 hours SCOC04

CCNA: Wide Area Networking describes WAN components and protocols and how they function in a wide area network. Special emphasis is placed on PPP, ISDN, X.25, and Frame Relay.

  • Introduction to WANs
  • WAN Protocols
  • PPP
  • ISDN
  • X.25
  • Frame Relay


 

CCNA: Using a Router Time: 3 hours SCOC05

CCNA: Using a Router introduces the different types of routing protocols, their use, and the function of routers.

  • Routing
  • Distance Vector Routing
  • Link State Routing
  • Understanding Routers


 

CCNA: Introduction to IOS Time: 4 hours SCOC06

CCNA: Introduction to IOS explains the basic operation of the Internetwork Operating System.

  • Router Startup
  • Router Startup in Setup Mode
  • EXEC Mode Commands
  • Router Status
  • Loading Configuration Files


 

CCNA: IOS Configuration Time: 3 hours SCOC07

CCNA: IOS Configuration shows how to configure passwords and banners, and introduces interface and protocol configurations for the Internetwork Operating System.

  • Passwords, Identification, and Banners
  • Configuring Interfaces
  • Sample Interface Configurations
  • Configuring Protocols


 

CCNA: Network Management Time: 3 hours SCOC08

CCNA: Network Management shows how to set up and maintain a network system.

  • LAN Congestion
  • Network Segmentation
  • Network Management System
  • Cisco FastHub 300


 

CCNA: Bridges and Switches Time: 3 hours SCOC09

CCNA: Bridges and Switches shows how to build and operate network bridges and switches.

  • The Spanning Tree
  • Bridges
  • Switches
  • ATM Switching
  • Cisco Catalyst 1900/2820 Switches


 

CCNA: TCP/IP Networking Time: 2 hours SCOC10

CCNA: TCP/IP Networking explains the functions of TCP/IP and how to manage it and other transport and network layer protocols.

  • Overview of TCP/IP
  • Transport Layer Protocols
  • TCP Specifics
  • Internet Layer Protocols


 

CCNA: IP Addressing Time: 2 hours SCOC11

CCNA: IP Addressing shows how to assign and use IP addresses.

  • The IP Address
  • Subnetting
  • Supernetting


 

CCNA: IP Routing Time: 2 hours SCOC12

CCNA: IP Routing explains how to configure IP addresses and implement IGRP routing protocol.

  • Configuring IP Addresses
  • Basic Routing Configurations
  • Interior Gateway Routing Protocols
  • Exterior Gateway Routing Protocols


 

CCNA: IPX Networking Time: 3 hours SCOC13

CCNA: IPX Networking explains how to operate and manage Novell's IPX protocol and addresses.

  • IPX Protocols
  • IPX Addressing and Encapsulation
  • Configuring IPX
  • Showing IPX Configurations


 

CCNA: Network Security and Control Time: 3 hours SCOC14

CCNA: Network Security and Control describes the components and operation of access lists for filtering network traffic.

  • Introduction to Network Security
  • Introduction to Access Lists
  • Configuring IP Access Lists
  • Configuring IPX Access Lists
  • Showing Access Lists


 

CCNA: Additional Configurations Time: 5 hours SCOC15

CCNA: Additional Configurations describes how to configure and verify ISDN, X.25, and Frame Relay routing. It also explains the operation of Frame Relay and other components of the network.

  • ISDN
  • Showing ISDN Configurations
  • X.25
  • Frame Relay
  • Features


 

CCNA: Exam Preparation 1 Time: 3 hours SCOC16

CCNA: Exam Preparation 1 provides practice exams that mimic the written portion of the CCNA test.

  • Exam Procedures
  • Practice Exam 1
  • Practice Exam 2


 

CCNA: Exam Preparation 2 Time: 4 hours SCOC17

CCNA: Exam Preparation 2 provides practice exams that mimic the written portion of the CCNA test.

  • Practice Exam 4
  • Practice Exam 5
  • Practice Exam 6


 

CCNA: Numbering Systems Time: 1 hour SCOC18

CCNA: Numbering Systems introduces the alternative base numbering systems that are used in Cisco management.

  • Decimal
  • Binary
  • Hexadecimal
  • Conversion Exercises

 

 


© 2003 Bridgeway Cyber Academy
 334 Second Street
Catasauqua PA 18032

Designed & Administered by PolyWeb Development